Knauf Schimmel-Vernichter Mold Remover is effective for eliminating mold, fungi, mildew, and algae. It can be used on various surfaces such as plaster, drywall, masonry, natural and artificial stones, wood, plastic, silicone joints, latex, cement, garden furniture, PVC window frames, doors, or shutters.
Application:
The product successfully removes mold, fungi, and yeast from various surfaces, including masonry, plaster, Eternit, natural and artificial stones, wood, plastic, as well as silicone and cement joints.
Features:
- Suitable for indoor and outdoor use
- Coverage: 10 sq.m/l
- Packaging: 500 ml
Usage:
Before using the product, the surface should be moistened and/or brushed. Spray from a distance of about 20 cm, let it act for 10-20 minutes, and rinse thoroughly with water. For more stubborn stains, repeat the procedure after 10 minutes. The product may damage some glazes, paints, varnishes, plastics, and other materials. If in doubt, test on a small area. Avoid contact with plants, metals, and other sensitive surfaces. Ensure good ventilation in closed spaces and avoid inhaling the fumes.
Composition:
- Less than 5% sodium hypochlorite bleach
IMPORTANT:
The product contains sodium hypochlorite and sodium hydroxide, which can be corrosive to metals and cause severe skin burns and eye damage. Store only in the original packaging. Use protective gloves, clothing, goggles, and a face mask. In case of an allergic reaction or ingestion, contact a poison control center immediately. In case of eye contact, rinse with water for several minutes, removing contact lenses if possible. Do not use the product with other chemicals, as dangerous gases (chlorine) may be released.
