A thin-layer cement adhesive for bonding terracotta, faience, ceramics indoors and outdoors, and porcelain stoneware (indoors, maximum tile size 40x40cm). The adhesive provides excellent results when laying coatings on concrete, cement screeds, and plaster surfaces, among others.
Not suitable for tile installation on surfaces subject to expansion/contraction or vibration (such as plasterboard, balconies, floors with underfloor heating, etc.). In these cases, it is recommended to use elastic adhesives like Teracol Flex class S1 or Teracol Super Flex class S2, produced by Boro Teracol Ltd.
Properties:
- For interior and exterior use
- Low slip
- Class C1T according to BDS EN 12004
- Water- and frost-resistant
- Good adhesion to the substrate
Consumption rate:
- walls - 3.5 kg/m² with a trowel tooth size of 5 mm.
- floor - 4.5 kg/m² with a trowel tooth size of 7 mm.
- floor - 5 kg/m² with a trowel tooth size of 10 mm.
