Knauf stone cleaner provides high efficiency and ease when cleaning stone surfaces.
Application:
When used on stone, this cleaner actively removes rust, limescale, plaster residues, concrete, cement, and other construction materials. It is not suitable for tiles that are sensitive to acids, such as marble, enamel, chrome, and anodized surfaces. In case of doubt, it is recommended to test on a small area.
Characteristics:
- Suitable for both indoor and outdoor use
- Coverage rate: 10-15 sq.m/l
- Volume: 1 liter
Usage instructions:
Before use, thoroughly wet the surfaces. Dilute the cleaner with water at a ratio of 1:10. Apply it with a sponge, ensuring you wear protective gloves. After a short time, rinse thoroughly with water. For heavier soiling, repeat the procedure and allow the product to work longer, using a brush if necessary.
Composition:
- Less than 5% non-ionic surfactants
- Fragrances
IMPORTANT!
The product contains carboxylic acids and may be corrosive to metals! Causes severe skin burns and eye damage! Store only in the original packaging! Use protective gloves, protective clothing, protective goggles, and face mask! In case of an allergic reaction or ingestion, immediately contact a poison control center or medical professional, showing the label or packaging! If it comes into contact with the eyes, rinse carefully with water for several minutes. If wearing contact lenses, remove them and continue rinsing.