Hydraulic Lime Mortar
It is a ready-made dry mixture of construction lime, cement, sand, and additives. It is suitable for making brick masonry when executing facades, load-bearing, and partition walls. The ready mixture is easily processed with a trowel or float. It is applied evenly to the entire contact surface of the bricks.
It is advisable not to spread the material over a long distance along the wall because, due to the strong water-absorbing properties of the bricks, there is a risk of the mortar drying out. The bricks are pressed against each other with a slight tapping to adhere both horizontally and vertically.
Excess material that protrudes beyond the plane of the wall is removed with a trowel. The mixture, when mixed with water, should be used within 2 hours. The product is compatible with the silo technology of TERAZID. It is available in silos with a volume of up to 3 m³.
| Bucket Dwell Time: | Approximately 2 hours |
| Thermal Conductivity Coefficient - λ: | 0.375 W/m·K |
| Particle Size: | 5 mm |
| Consumption Rate: | Approximately 55 liters/m³ of brick masonry |
